Furuno DFF 3D Multi Beam Sonar Fish Finder for TZTouch
The Furuno DFF3D is an innovative tool for efficient fish location and seabed profile surveying, utilizing new multi beam technology.
Turn your NavNet TZtouch series MFD into a multi beam sonar that can see 120-degrees port to starboard, allowing you to see the depth and direction fish schools are moving, while displaying the seabed condition in real time.
Features:
- Sidebar detection range is up to 200 m (over 650 feet)* in a 120-degree swath port and starboard direction
- Deep water, main beam penetration directly under the boat is approx. 300 m (over 980 feet)*
- Built-in motion sensor (standard supply) stabilizes the display to give clear and stable images even under rough sea conditions
- Depending on the situation and preference, a combination of screen modes can be displayed
-
Groundbreaking four modes bring a whole new dimension to your fishing:
- Cross Section
- 3D Sounder History
- Triple / Single Beam Sounder
- Side Scan
*Depending on bottom, water and installation conditions.
Specifications:
|
|
Furuno DFF-3D
|
|
General
|
|
|
TX Frequency
|
165 kHz
|
|
Output Power
|
800 W
|
|
Minimum Range
|
3 m
|
|
Basic Range
|
5-1200 m
|
|
Detection Range
|
200 m* (Side Beam Best Performance)
300 m* (Main Beam Directly Under Boat) *Depending on bottom, water and installation.
|
|
Beam Angle for Triple Beam Sounder
|
20°-50° from right under
|
|
Display Mode
|
Triple/Single Beam Sounder, Side Scan, Cross Section, 3D Sounder History
|
|
Weight
|
3kg, 6.6lbs
|
|
Interface
|
|
|
LAN
|
1 port, Ethernet 10/100Base-TX
|
|
External KP
|
1 port (optional external KP kit required)
|
|
Environment
|
|
|
Temperature
|
-15°C to + 55°C
|
|
Relative Humidity
|
93% or less at +40°C
|
|
Waterproofing
|
IP55
|
|
Power Supply
|
|
|
DFF-3D
|
12-24 VDC, 1.4-0.7 A
|
|
Rectifier (PR-62, option)
|
100/110/220/230 VAC, 1 phase, 50/60Hz
|
|
Equipment List
|
|
|
Standard
|
Multi Beam Sonar
DFF-3D
Transducer
B54 (Bronze, for thru-hull mount)
SS54 (Stainless, for thru-hull mount)
or TM54 (for transom mount)
Spare Parts, Installation Materials
|
|
Option
|
External KP Kit
Cable Assembly (2 m/10 m)
Rectifier
PR-62
|
N.B. Transducers & other equipment sold separately.
